Self Adhesive 3D Mosaic Wall Tiles – Slate – 30cm x 30cm (10 pack)

Create a premium natural-stone feature wall with our Self Adhesive 3D Mosaic Wall Tiles in a textured slate pattern. These peel-and-stick panels bring depth, contrast, and a contemporary stone-effect finish without grout, heavy tools, or a long installation process.

Available Colours:

• Black mixed with Gold
• Black mixed with Grey
• Black mixed with Silver

Pack Size: 10 sheets
Sheet Size: 30cm x 30cm
Coverage: Approx. 0.9m2
Installation: Self-adhesive backing – no grout required

Key Benefits

• Fast and clean DIY or trade installation
• Lightweight panels that are easy to trim to size
• Cost-effective alternative to traditional wall tiling
• Ideal for refurbishment projects and interior feature upgrades
• Low-maintenance wipe-clean finish

The layered slate design adds visual movement and a luxury stone-look texture, making it ideal for kitchen splashbacks, media walls, bars, salons, reception areas, and statement commercial interiors.

The 2mm 3D profile helps disguise minor surface imperfections while delivering a durable, wipe-clean finish for easy everyday maintenance.

Instructions

1. Clean the wall with a suitable degreaser and ensure it is completely dry.
2. Mark a straight guide line with a level or chalk line before placing the first tile.
3. Trim the first sheet if needed to create a neat starting edge.
4. Peel off the backing film carefully, avoiding direct contact with the adhesive layer.
5. Align the tile to your guide line and press firmly into place.
6. Continue across the surface, using the pattern edges to keep joins aligned and pressing each sheet securely.

Recommended Surfaces

• Flat, smooth, clean wall surfaces
• Smooth ceramic or glass splashback tiles
• Acrylic wall panels
• Mirror
• Smooth painted plasterboard
• Stainless steel
• Laminate

Non-Recommended Surfaces

• Uneven brick or stone walls
• Bare plasterboard or unsealed plaster
• Unpainted plywood
• Oily or heavily textured surfaces

Aftercare

• Water resistant, but not suitable for direct wet zones such as shower enclosures
• Steam resistant once fully bonded
• Clean with a damp cloth and mild detergent only
• Remove spills promptly to avoid staining
• To remove a tile, warm gently with a hairdryer, lift carefully, and clean any adhesive residue with soapy water
• Keep away from direct heat sources such as gas hobs
• Avoid prolonged direct sunlight exposure